Precautions for Customized Tea Caddy

1. Customized tea caddy size (capacity)

   The tea cans are generally of common sizes, and the length and width are generally fixed and universal. The height of custom-made tea caddy can be adjusted appropriately according to the customer's product capacity (change the height of the tea caddy). Very few customers have their own fixed size. Generally, it is recommended that most customers customize according to the existing general capacity size; Special sizes require mold opening. The cost of mold opening for tea caddy is generally higher ($1,000-$3,000)

2. The thickness of the iron sheet/lid of the tea caddy

The tea caddy with a capacity of less than 250Gg generally use 0.23MM iron sheet, and the tea caddy with a capacity of 250g-500g are recommended to use a thickness of 0.28MM iron sheet. The lid of the square tea caddy is usually made of Belle lid (machine oil nozzle), and the round tea caddy is made of leaves. There are too many lids, and the lids are also universal. If customers have special requirements on the shape and need to be customized, the custom-made lids will increase the cost. The custom-made tea caddy with a capacity of more than 500g generally use squares, and the thickness of the iron material is 0.30mm-0.35mm.

3. Printing of tea caddy

   The color printing of tea caddy is usually four-color or spot-color printing. If there are several spot-colors in the design manuscript, each additional spot-color printing will increase the cost. Each tea caddy of different models and sizes will have a printing capacity. It is not the same. The color printing special edition of tea caddy is printed at a minimum of 12,000. The printing quantity depends on the number of layouts. It is generally not easy to imposition. Tea caddy of different sizes and models cannot be imposition. Because the stamping is different, it is generally recommended to make the special edition quantity. You can recommend white-painted tea caddy or light-skinned tea caddy.

4. Tea caddy proofing

   Existing mold proofing fee is 2500 yuan/model, cycle 10-15 days, iron sheet (no printing) proofing fee is 1500 yuan/model, cycle 5-7 days, small tea caddy below 250g, molding proofing fee is 1350 yuan/model, cycle is about 3-5 days

5. Production cycle of bulk tea caddy

  The mass production cycle of color-printed tea caddy is 30-45 days from the customer's confirmation document to the receipt of the deposit; the production cycle of small tea caddy below 250g is shorter than 30-35 days, and the stock of tea caddy is about 3-5 days. .

6. How to transport and pack tea caddy 

   Generally, the shipping method of tea caddy over 250g is bundled and shipped with straps, which is convenient to save costs; small tea caddy under 250g can be packaged in corrugated cardboard boxes for shipment, or can be bundled with straps, customized according to customer requirements; The shipping price of box packaging is relatively high, and it is recommended to transport a small amount of spot goods with wooden boards, but this will increase the freight cost.

7. Inner coating of tea caddy

  There are two types of tea caddy, two-piece tea caddy and three-piece tea caddy, all of which need to be oiled inside to prevent rust in the can.

8. Quality inspection standards for tea caddy

  The quality standard of tea caddy is strict on the appearance, and there should be no scratches. The detection is mainly based on the calculation of the defective rate ratio. The standard ratio of the national standard is three thousandths. The tea caddy need to undergo food safety testing to check whether they meet the food safety standards. , Qualified and then packed and shipped.

9. The process of protruding and engraving tea caddy

   Tea caddy can also be engraved by protruding. The cost of engraving molds is about several hundred to several thousand dollars, depending on the size of the customer's engraving layout.

10. Food grade inspection of tea caddy

   Because it is directly filled with tea, you usually ask whether the jar can meet the food-grade standard. The tea caddy are made of first-grade food-grade tinplate. The iron material has a food-grade test report. The inner coating water-based glue also has a food-grade test report. You can use it with confidence. Customers can directly pack edible oil tea leaves after the finished product is out. Customers can also use tea caddy for food-grade testing. All are possible, and the testing cost is about 1,000-2,000 US dollars.